U heeft gezocht op: Industrial Physics

Leverancier: Industrial Physics

Omschrijving: The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Leverancier: Industrial Physics

Omschrijving: Durometer, Weight set, 4 kg, for Durometer shore D

Leverancier: Industrial Physics

Omschrijving: Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Leverancier: Industrial Physics

Omschrijving: RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Catalogus nummer: (SIMESP1560)

Leverancier: Industrial Physics

Omschrijving: Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMELI0010)

Leverancier: Industrial Physics

Omschrijving: The MaxiLigno are equipped with the latest technology for precision and easy handling.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMELD3059)

Leverancier: Industrial Physics

Omschrijving: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMELD0560)

Leverancier: Industrial Physics

Omschrijving: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

UOM: 1 * 1 ST

Sale

Leverancier: Industrial Physics

Omschrijving: Anodised aluminium and stainless steel viscometer cups with nozzle for break-thread flow time comparative measurements.

Leverancier: Industrial Physics

Omschrijving: Stainless steel flow cup viscometers with fixed nozzle for measuring coatings and other fluids during application or production.

Leverancier: Industrial Physics

Omschrijving: Exposed junction wire probes for curve-x logger 250 °C, set includes 6 wire probes and 25 self-adhesive pads

Leverancier: Industrial Physics

Omschrijving: Temperature probe identification kit, numbered 1 to 6

Catalogus nummer: (SIMEDC7100)

Leverancier: Industrial Physics

Omschrijving: DewCheck 4 - Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. It can be used to measure relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT).

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMEDI0011)

Leverancier: Industrial Physics

Omschrijving: This plastic needle compass is equipped with revolving dial. The direction in which the compass needle points is referred to as magnetic north, making it extremely easy to determine the position of gardens, streets and buildings.

UOM: 1 * 1 ST

Sale

Leverancier: Industrial Physics

Omschrijving: High quality insulation boxes with outer shield of high-grade stainless steel. The high grade stainless steel inner box is shielded with a carefully formulated mixture of insulation material, which makes the combination suitable to resist high temperatures for a long time.

Leverancier: Industrial Physics

Omschrijving: These scratching tools can perform a Machu corrosion test. Each tool is provided with a 1 mm width cutter to cut the coating down to the metal.