U heeft gezocht op: Liners+gc+septa+gc+ferrules


24 165  results were found

SearchResultCount:"24165"

Sort Results

List view Easy View (new)

Rate These Search Results

Leverancier: Trajan Scientific and Medical
Omschrijving: Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.

Leverancier: Trajan Scientific and Medical
Omschrijving: Spuiten voor automatische monsternemer. Voor AOC14, AOC17 en AOC20

Leverancier: Restek
Omschrijving: Topaz GC inlet liners feature revolutionary technology and inertness.

Catalogus nummer: (REST21303)
Leverancier: Restek
Omschrijving: This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.
UOM: 1 * 1 ST


Catalogus nummer: (REST20504)
Leverancier: Restek
Omschrijving: This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.
UOM: 1 * 1 ST


Leverancier: Restek
Omschrijving: Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection port liner. The septum uses a 23-gauge (0,63 mm, 0,025”) needle or probe with a blunt, truncated conical tip. Since the syringe plunger end details are determined by manual or autosampler compatibility. The advantages of the septum include elimination of septum coring, longer life, consistent and low needle insertion force.

Leverancier: Agilent
Omschrijving: QuickPick purged packed inlet PM kit, with 5 non-stick BTO septa, 1 O-ring, 1 ferrule and 1 disposable glass liner

Leverancier: Merck
Omschrijving: Ready to use GC septa for inlet temperature of up to 100 to 350 °C.

Leverancier: Trajan Scientific and Medical
Omschrijving: These GC ferrules are made from 100% PTFE. They are soft, completely inert, and have very low friction.

Leverancier: Merck
Omschrijving: These septa are suitable for use with 50 to 300 °C inlet temperatures.

Leverancier: Merck
Omschrijving: Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Leverancier: VWR Collection
Omschrijving: Bijna alle septa hebben één gelamineerde zijde met PTFE (hoge chemische bestendigheid) en vormen een inerte barrière tussen dragermateriaal en monster.

Leverancier: Merck
Omschrijving: SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Leverancier: VWR Collection
Omschrijving: Bijna alle septa hebben één gelamineerde zijde met PTFE (hoge chemische bestendigheid) en vormen een inerte barrière tussen dragermateriaal en monster.

Leverancier: Trajan Scientific and Medical
Omschrijving: Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Leverancier: Merck
Omschrijving: Ascentis®Phenyl HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Bel voor prijs
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dit artikel is geblokkeerd voor uw organisatie. Neem contact op met uw inkoopafdeling voor meer informatie
Het orginele artikel is niet langer beschikbaar. Het alternatief dat wordt getoond is beschikbaar
Product(en) gemarkeerd met dit symbool worden niet meer verkocht cq verkocht tot het einde van de voorraad. Alternatieven zijn mogelijk beschikbaar door te zoeken met het VWR-catalogusnummer dat hierboven wordt vermeld. Voor meer informatie kunt u contact opnemen met customer service: 020-4808410.
1 - 16 of 24 165
no targeter for Bottom