U heeft gezocht op: Industrial Physics


616  results were found

SearchResultCount:"616"

Sort Results

List view Easy View (new)

Rate These Search Results

Leverancier: Industrial Physics
Omschrijving: These thickness gauges are designed for the measurement of coatings of painting, enamel, galvanizing, metalising and plating on steel.

Leverancier: Industrial Physics
Omschrijving: Ring-type surface probes to measure object temperature.

Leverancier: Industrial Physics
Omschrijving: Magnet probes to measure object temperature, fitted with an ultra strong magnet, but still with a very low mass and size.

Leverancier: Industrial Physics
Omschrijving: Test panels are used to enhance reproducibility of physical and chemical tests. Each panel is equipped with a hole for hanging and handling.

Catalogus nummer: (SIMESP1895)
Leverancier: Industrial Physics
Omschrijving: Impact tester used to determine the impact resistivity and flexibility of materials.
UOM: 1 * 1 ST


Leverancier: Industrial Physics
Omschrijving: Nylon brush for cross cut adhesion test

Leverancier: Industrial Physics
Omschrijving: Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Leverancier: Industrial Physics
Omschrijving: Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.
Leverancier: Industrial Physics
Omschrijving: Accessory for coating tester, Knife with rubber grip

Catalogus nummer: (SIMERV2100)
Leverancier: Industrial Physics
Omschrijving: Simple hand-held digital thermo/hygrometer.
UOM: 1 * 1 ST


Catalogus nummer: (649-0037)
Leverancier: Industrial Physics
Omschrijving: This digital tachometer is designed to be used for both contact and non-contact measurements.
UOM: 1 * 1 ST


Catalogus nummer: (SIMELI0055)
Leverancier: Industrial Physics
Omschrijving: This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.
UOM: 1 * 1 ST


Leverancier: Industrial Physics
Omschrijving: These coated metal calibration standards consist of a set of four calibration plates.

Catalogus nummer: (SIMELD3056)
Leverancier: Industrial Physics
Omschrijving: SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.
UOM: 1 * 1 ST


Leverancier: Industrial Physics
Omschrijving: This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Leverancier: Industrial Physics
Omschrijving: Spare Karsten tube, vertical

Bel voor prijs
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dit artikel is geblokkeerd voor uw organisatie. Neem contact op met uw inkoopafdeling voor meer informatie
Het orginele artikel is niet langer beschikbaar. Het alternatief dat wordt getoond is beschikbaar
Product(en) gemarkeerd met dit symbool worden niet meer verkocht cq verkocht tot het einde van de voorraad. Alternatieven zijn mogelijk beschikbaar door te zoeken met het VWR-catalogusnummer dat hierboven wordt vermeld. Voor meer informatie kunt u contact opnemen met customer service: 020-4808410.
129 - 144 of 616
no targeter for Bottom