U heeft gezocht op: Industrial Physics

Catalogus nummer: (SIMELD3059)

Leverancier: Industrial Physics

Omschrijving: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMELD0560)

Leverancier: Industrial Physics

Omschrijving: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

UOM: 1 * 1 ST

Sale

Leverancier: Industrial Physics

Omschrijving: Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.

Certificaten

Leverancier: Industrial Physics

Omschrijving: Titanium anodised aluminium flow cups for measurement of relative viscosity.

Leverancier: Industrial Physics

Omschrijving: These flow cups are composed of an anodised aluminium cup and a stainless steel nozzle.

Leverancier: Industrial Physics

Omschrijving: Viscometer flow cup, Accessory, Nozzle, Roestvrij staal

Leverancier: Industrial Physics

Omschrijving: This coating thickness gauge is a fully electronic apparatus, that uses magnetic and eddy current principles, to measure coating thickness on both ferrous (Fe) and non ferrous (NFe) metals.

Catalogus nummer: (SIMEDC9015)

Leverancier: Industrial Physics

Omschrijving: Accessory for coating tester, Voor: (Hull) Roughness Gauge, Calibration plate

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMESP4400)

Leverancier: Industrial Physics

Omschrijving: This manual resistance tester can be used for testing the resistivity of coatings at various stages of deformation in accordance with ISO 1520. The built in gear-box minimises the manual force which is required to deform the test panel, allowing to perform a smooth deformation. The degree or deformation is digitally displayed at a resolution of 0,01 mm.

UOM: 1 * 1 ST

Sale

Leverancier: Industrial Physics

Omschrijving: Permeability cups are designed to determine the water vapour transmission of paints, varnishes, coatings and related products. Permeability cup is suitable for testing both self-supporting coating and non-self-supporting coatings.

Leverancier: Industrial Physics

Omschrijving: Quality steel comparison standards designed to indicate the surface condition of blasted steel, in grades of fine, medium and coarse.

Leverancier: Industrial Physics

Omschrijving: Surface comparators for determining roughness by touch and sight.

Leverancier: Industrial Physics

Omschrijving: S-39 leather wheel set (leather strip mounted to brass hub)

Catalogus nummer: (SIMESP1896)

Leverancier: Industrial Physics

Omschrijving: Impact test used to determine the impact resistivity and flexibility of materials.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMESP1570)

Leverancier: Industrial Physics

Omschrijving: This high precision film and foil thickness gauge is specially developed for measuring replica tapes as Testex®.

UOM: 1 * 1 ST

Sale

Catalogus nummer: (SIMELD9200)

Leverancier: Industrial Physics

Omschrijving: This instrument is an easy to use, lightweight hydraulic adhesion tester that applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle. The adhesion test head has self adjusting legs, which ensure that the pull off force is always applied 90° to the coating even on uneven substrate surfaces. The self adjusting feature results in extremely accurate and reproducible adhesion test results.

UOM: 1 * 1 ST

Sale