U heeft gezocht op: Bohlender


914  results were found

SearchResultCount:"914"

Sort Results

List view Easy View (new)

Rate These Search Results

Leverancier: Bohlender
Omschrijving: PTFE, white.

Leverancier: Bohlender
Omschrijving: <p>Laboratory flask made of borosilicate glass.</p>

New Product

Leverancier: Bohlender
Omschrijving: Made of PTFE, white.

Leverancier: Bohlender
Omschrijving: PTFE, white.

Leverancier: Bohlender
Omschrijving: T-shaped connector made of static dissipative PE-EX.

Leverancier: Bohlender
Omschrijving: Screw cap made from PE and body made from PTFE.

Catalogus nummer: (BOHLH988-40)
Leverancier: Bohlender
Omschrijving: Screw caps, made of PPS, with handy knurl, with integrated PTFE/silicone gasket for compensation of unevenness on the sealing surface.
UOM: 1 * 1 ST


Leverancier: Bohlender
Omschrijving: PFA, PTFE, PP and glass.

Catalogus nummer: (BOHLA119-24)
Leverancier: Bohlender
Omschrijving: PFA, translucent.
UOM: 1 * 1 ST


Leverancier: Bohlender
Omschrijving: Funnels, made of PTFE, white. Conical opening with long outlet.

Leverancier: Bohlender
Omschrijving: Straight fitting, made of PTFE, with one connector for elastic tubing (e.g. Viton®, Tygon®, silicone) and one screw-in thread (either NPT or G).

Catalogus nummer: (BOHLD804-12)
Leverancier: Bohlender
Omschrijving: PP screw cap, blue, distributor body and tubing connectors made from PP
UOM: 1 * 1 ST


Leverancier: Bohlender
Omschrijving: b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. Solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Leverancier: Bohlender
Omschrijving: Flexible corrugated tubing made of static dissipative plastics.

Catalogus nummer: (BOHLB317-60)
Leverancier: Bohlender
Omschrijving: PTFE head with two threaded necks GL14 for connection of hard-walled tubing by means of separately available laboratory screw joints. Connecting nut is made of PTFE reinforced with glassfibres. GL hose connectors are recommend for soft, flexible tubing. Temperature resistant from −200 to +250 °C with suitable vaccum transparent. PFA, transparent.
UOM: 1 * 1 ST


Catalogus nummer: (BOHLF763-08)
Leverancier: Bohlender
Omschrijving: Straight UNF screw-in tube fitting made of PTFE. One side with fitting thread GL 14 for connecting hard-walled tubes and tubing by means of BOLA Laboratory Screw Joints. Other side with male screw-in thread UNF 1/4 28G for connection to units and fittings with female thread UNF 1/4 28G.
UOM: 1 * 1 ST


Bel voor prijs
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dit artikel is geblokkeerd voor uw organisatie. Neem contact op met uw inkoopafdeling voor meer informatie
Het orginele artikel is niet langer beschikbaar. Het alternatief dat wordt getoond is beschikbaar
Product(en) gemarkeerd met dit symbool worden niet meer verkocht cq verkocht tot het einde van de voorraad. Alternatieven zijn mogelijk beschikbaar door te zoeken met het VWR-catalogusnummer dat hierboven wordt vermeld. Voor meer informatie kunt u contact opnemen met customer service: 020-4808410.
193 - 208 of 914
no targeter for Bottom