U heeft gezocht op: Chromatografie reserveonderdelen


258  results were found

SearchResultCount:"258"

Sort Results

List view Easy View (new)

Rate These Search Results

Leverancier: Agilent
Omschrijving: These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Leverancier: Agilent
Omschrijving: These spray chambers and supplies are fully compatible with your PerkinElmer ICP-MS.

Leverancier: Agilent
Omschrijving: These ICP-OES series are compatible with a range of accessories and supplies designed to extend the capabilities of the instruments.

Leverancier: Agilent
Omschrijving: These hyperskimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Leverancier: Agilent
Omschrijving: A broad spectrum of economical brass regulators, wall brackets, and NPT adapters.

Leverancier: Agilent
Omschrijving: Lever for holmium oxide filter

Leverancier: Agilent
Omschrijving: Rotor seal, vespel, pH 0 - 10, Voor: LC/MS

Leverancier: Agilent
Omschrijving: Abrasive mesh (micro-grit paper)

Leverancier: VARIAN
Omschrijving: Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Catalogus nummer: (HEWLBMT-4)
Leverancier: Agilent
Omschrijving: A range of high quality common, interface, and source supplies for LC/MS.
UOM: 1 * 1 ST


Catalogus nummer: (VARI394958700)
Leverancier: VARIAN
Omschrijving: Tube collector
UOM: 1 * 1 ST


Catalogus nummer: (REST27480.1)
Leverancier: Restek
Omschrijving: SPME automated sample preparation reduces sample handling and solvent consumption.
UOM: 1 * 1 ST


Leverancier: Restek
Omschrijving: Outlet ball valve

Leverancier: Restek
Omschrijving: These capillary adaptable FID replacement jets are engineered with a fluted tip to guide the capillary column into the jet.

Catalogus nummer: (REST21067)
Leverancier: Restek
Omschrijving: Installation Kit for 2 mm ID columns; for valve applications, Kit contains 1× stainless steel nut 3,2 mm, 1× stainless steel Valco nut, 1× Vespel/graphite ferrule 3,2 mm, 1× stainless steel Valco ferrule 3,2 mm, 1× stainless steel front ferrule 3,2 mm, 1× stainless steel back ferrule 3,2 mm
UOM: 1 * 1 Kit


Leverancier: Restek
Omschrijving: These FID collector assembly kits are made of high-quality stainless steel. Ideal for Agilent 5890/6850/6890/7890 GCs.

Bel voor prijs
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dit artikel is geblokkeerd voor uw organisatie. Neem contact op met uw inkoopafdeling voor meer informatie
Het orginele artikel is niet langer beschikbaar. Het alternatief dat wordt getoond is beschikbaar
Product(en) gemarkeerd met dit symbool worden niet meer verkocht cq verkocht tot het einde van de voorraad. Alternatieven zijn mogelijk beschikbaar door te zoeken met het VWR-catalogusnummer dat hierboven wordt vermeld. Voor meer informatie kunt u contact opnemen met customer service: 020-4808410.
177 - 192 of 258
no targeter for Bottom